Sap Redirect Url Is Null

A redirect URI, or reply URL, is the location where the authorization server sends the user once the app has been successfully authorized and granted an authorization code or access token. The authorization server sends the code or token to the redirect URI, so it's important you register the correct location as part of the app registration. The redirected URL can point to the same domain or to a different domain. Other than 302 status code there are a number of other codes which can be used. Please check out our tutorials on basics of URL redirection and URL redirect in Java Servlet. Using RedirectView. RedirectView is the suggested way to perform URL redirection.

Skip to end of metadataGo to start of metadata

Purpose

This topic describes how to change the default portal URL to give users a more user friendly URL, e.g. to change from 'http://hostname.domain.com:50000/irj/portal' to 'http://hostname.company.com'.

Overview

To change the URL which users employ to access the portal, there are in general 3 approaches, which are discussed in turn below.

Change the instance configuration - for single-instance installations
Use a load balancer - for clustered installations
Use a reverse-proxy

1. Change the instance configuration

1.1 Remove the Port from the URL:

For Enterprise Portal 7.0X: Update the AS Java Configuration Samsung bluetooth aath200hbc manual. Rocky balboa the best of rocky rar files.

Open the Web AS Java Visual Administrator
Goto -> Cluster -> Dispatcher -> Services -> HTTP Provider
Choose Ports
Change the port number to 80 for HTTP and 443 for HTTPS (SSL) - as these are the default ports for these protocols, they don't need to be explicitly entered in the URL used to call the portal
Choose Update and save.

For Enterprise Portal 7.3X: Update the ICM Configuration

As 7.3 uses the ICM instead of the Java Dispatcher for accepting incoming HTTP requests, the port configuration now takes place in the instance profile via parameter icm/server_port_0
For example, to set the HTTP port to the HTTP default port 80 and the HTTPS port to the SSL default port 443 (so that the ports do not need to be explicitly stated in the URL), you would adjust the instance profile as follows:
# Definition of the ports
icm/server_port_0 = PROT=HTTP, PORT=80
icm/server_port_1 = PROT=HTTPS, PORT=443

Note: On UNIX systems, you need root access to bind to ports less than 1024 - but you don't want to start your Application Server with the root user. You can achieve this by using the external program icmbnd, and updating the instance profile as follows:
# Use default ports
# icmbnd needs root permissions
# 'chown root icmbnd' and 'chmod 4755 icmbnd'
icm/server_port_0 = PROT=HTTP, PORT=80, EXTBIND=1
icm/server_port_1 = PROT=HTTPS, PORT=443, EXTBIND=1
exe/icmbnd = <path of executable>

1.2 Remove the irj/portal:

For Enterprise Portal 7.0X:

Goto Cluster-> Server-> Services-> HTTP provider
Enter /irj/portal in the start page text field
Choose the save properties button
Restart the instance.

For Enterprise Portal 7.3X:

In 7.3x, this is done via the NetWeaver Administrator: 'http://<host>:<port>/nwa'
Follow menu path: Configuration > Connectivity > HTTP Provider Configuration
Enter /irj/portal in the default start page property
Click save

Alternate approach for Enterprise Portal 7.3X:

You could also achieve this at the ICM level using a redirect rule like the following:
icm/HTTP/redirect_0 = PREFIX=/,TO=/irj/portal,HOST=hostname.company.com

Url Redirect Free

Note: Both of these approaches will result in a redirect response being issued to the browser, redirecting from 'http://hostname.company.com' to 'http://hostname.company.com/irj/portal', so users will still see /irj/portal in the adress bar - it just won't appear in the link provided to the users. If you want to avoid that it appears in the address bar, consider using a reverse proxy instead.

2. Use a Load Balancer

The above configurations take effect at the instance level. If you use a cluster, you need to use a load balancer in front of the portal, and you should perform any configuration on this component instead. You can use many types of software or hardware load balancer with the portal, the most common is probably the SAP Web Dispatcher, so the below example is for the Web Dispatcher. Configuration of the Web Dispatcher is similar to configuration of the ICM for the instance (since they are based on the same technology). So, to have the web dispatcher listen for HTTP requests on port 80, and redirect requests with no path to /irj/portal, you would use the following configuration:
icm/server_port_0 = PROT=HTTP,PORT=80,HOST=hostname.company.com
icm/HTTP/redirect_0 = PREFIX=/,TO=/irj/portal,HOST=hostname.company.com
Note: The comments above about using icmbnd for ports less than 1024 on UNIX systems still apply. It's also worth noting that you could use a Web Dispatcher even for a singe-instance system for exactly this use case: if you want to accept requests on port 80 on UNIX systems.

3. Use a Reverse Proxy

You can use a fully featured reverse proxy in addition to a load balancer, or the reverse proxy can also perform load balancing functions. There are several software solutions that can act as a reverse proxy. The most often used software is probably Apache. The general solution looks like this:
Browser <-> Reverse Proxy <-> Portal
The user connects to the URL 'http://reverseproxy.company.com', whereas the Reverse Proxy connects to the portal with 'http://hostname.company.com:50000/irj/portal'. This access is transparent for the user. If your reverse proxy is configured to perform URL rewriting, then the /irj/portal path can also remain invisible to the end user.

Purpose

Demonstrate how the redirect can be used in the Web Dispatcher.

Overview

This page will show 2 examples of how to configure the Web Dispatcher to redirect URL '/' to a custom start URL.
How to install games citra 3ds emulator for mac 2017.

Types Of Url Redirects

The Web Dispatcher used in this example is connected to a Solution Manager and Netweaver systems, respectively:

Option 1 - Using the icm/HTTP/redirect_<xx> parameter

Define an icm/HTTP/redirect_<xx> parameter on the profile.

Url Redirect Service

Example of parameter:

Now the same set of rules as above were created but using the Modification Handler

Option 2 - Using the Modification Handler

It is also possible to use the parameter icm/HTTP/mod_<xx> to perform URL redirect.

Although this setup could be a bit more complex than using the Redirect parameter, it also allows more actions to be performed
Example of parameter:

Example of 'filter_rules.txt' file using regular expressions:

Hunterloft662